Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your Mercedes-Benz will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going effective, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Mercedes-Benz light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Park Place so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a Mercedes-Benz?

When your check engine light comes on, this could be as commonplace as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigorous problem that could cause rigorous damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow generally means something less rigorous but a blinking check engine light expresses that your vehicle’s engine is in rigorous trouble and service is fundamental immediately. If your check engine light is blinking in your Mercedes-Benz, we highly recommend not to drive the vehicle and schedule Mercedes-Benz service today. Below is a list of the most beneficial reasons your check engine light can come on:

  • The battery is low or dead. The battery in your Mercedes-Benz is every profound. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Mercedes-Benz you drive, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less suitable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Mercedes-Benz 's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are needed for your Mercedes-Benz. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Mercedes-Benz is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to giant changes, like altitude. If your Mercedes-Benz is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your Mercedes-Benz ’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Park Place offers a complimentary multi-point inspection with every Mercedes-Benz service. If you have an issue with your catalytic converter and don't get it serviced, your Mercedes-Benz will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause substitute problems from overheating.
  • One of the most common and frequent cause is that your Mercedes-Benz gas cap is loose, damaged or missing. The gas cap for your Mercedes-Benz serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on shortly after you put gas in your Mercedes-Benz, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or substitute item can wreak havoc on your Mercedes-Benz if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound established, bring your to Mercedes-Benz and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor perform and damage caused by poor installation perform corrected.
  • Your Mercedes-Benz has a vacuum leak. Every Mercedes-Benz has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to active heat or extreme chilly.

Check Engine Light Service Mercedes-Benz

What do you do when you’re driving along in your Mercedes-Benz and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Mercedes-Benz owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Mercedes-Benz checked as soon as likely. Ignoring that warning could end up causing major damage to expensive engine components.

When your Mercedes-Benz 's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t marvelous, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is embrace with an electronic scan tool that is used by our Mercedes-Benz auto repair mechanics at Park Place. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled experienced to embrace the issue and repair it.

Mercedes-Benz Check Engine Light

If the check engine light in your Mercedes-Benz starts glaring, that means that the problem needs hasty attention and your Mercedes-Benz should be brought in hastily. A glaring light suggests that the problem is dangerous and if not taken care of hastily may result in major break to the vehicle. This flashing light usually indicates a rigid engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can rapidly boost the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can entirely be the cause. A damaging, classical or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Park Place rapidly by calling 4692147058. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly expensive repair.

Mercedes-Benz Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also friendly as the OBD (on-board computer diagnostic system) in your. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling meaningful diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is surely supposed to do: be your guide. Unfortunately, evident and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of functional OBD codes, there are also hundreds of functional reasons for the light, including:

  • Fuel and air metering systems problems
  • Ignition system faults
  • Transmission issues
  • Bad Spark Plugs
  • Emissions controls issues
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • O2 Sensor

This is why it is memorable for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a unhealthy concern, you risk damaging your car added by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Mercedes-Benz mechanic. Call Park Place at 4692147058 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the helpful code reading and diagnosis. The average rate for a check engine light diagnosis & testing is typically between $88 and $111. The exceptional news, Park Place offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light.

Mercedes-Benz Check Engine Light Flashing

Although there are many attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several innate causes including something as prevalent as a loose gas cap. Additional innate reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Mercedes-Benz Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Mercedes-Benz issue was fixed.

Every Mercedes-Benz was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its necessary systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is awry nor what to do about it. That’s where we come in; Park Place provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Notably Qualified Service professional.

Is it safe to drive your Mercedes-Benz with the check engine light on?

If the check engine light is twinkling, this means that there is a hazardous issue and it is recommended to service your Mercedes-Benz immediately. This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more hazardous problem. Call the specialists at Park Place by dialing 4692147058 so you can describe the issues. Or reduce your speed and bring your Mercedes-Benz to our certified mechanics as soon as cooperative.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is shining, we advise that you pull over and contact Park Place to help favor if your vehicle is safe to drive in or if we advise a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most continuously misunderstood lights or indicators in your Mercedes-Benz is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Mercedes-Benz. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can determine a assortment of different things. It can be as effortless as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your Mercedes-Benz, contact Park Place. Our Mercedes-Benz service department can assist you find out what code is turning your check engine light on or probe why your check engine light is flashing. Contact Park Place today!